The situation when the plumbing in the house is free from problems is directly proportional to the chance that you have a clean water supply for your daily needs. What homeowner doesn’t crave this? However, the fact is not always sweet. Water pipes are often an annoying problem when they threaten the existence of clean water in your home and make it difficult for you to take a shower or even wash your hands.
If it turns out that we share the same concerns regarding this, you are on the right page! The following are common plumbing problems at home, complete with several possible solutions.
The most annoying moment when you realize this problem occurs when you want to wash the dishes after a family meal. Water will stagnate and cannot be channeled into the pipe because it is clogged. The first step is definitely to check if there are piles of leftover rice or other types of food that clog the pipe filter section. But if this has been done and the water still doesn’t work, do the following steps.
Try using a plunger or a suction/pipeline cleaner.
Apply a liquid mixture consisting of hot water, baking soda, and vinegar down the pipe.
It seems that this method will only temporarily eliminate congestion, a professional plumber such as Plumbers in Ryde is needed to completely overcome the congestion.
Clack, clack, clack, clack, clack… is the most annoying sound for the ears of homeowners that comes from a leaky faucet in their kitchen or bathroom. It’s not just a matter of discomfort, a leaky faucet that is already severe also affects the wasteful use of water at home.
Try ‘tinkering’ with the ring or the ring on the faucet.
Cover with a special plaster leaking pipe at the source of the leak. Maybe this is only temporary.
Make sure you have a complete set of tools to handle this. If you have doubts but are still determined to handle them with minimal tools, the leak will only get worse. Therefore submitting it to a professional Plumber is the best way to do it.
Faulty Toilet Flush Tool
There are two common possible malfunctions, namely when the flush tool can’t stop working and the flush tool doesn’t work at all. The first problem occurred because of a leak in the portal for the water channel to clean the toilet which should have been controlled. The second problem occurs when there is a blockage in the pipeline which is usually the path for sewage to go to the disposal site.
For a toilet flush that does not stop working, check the appropriateness of the valve or valve that is the center of water flow control in the toilet. It could be that the valve is too loose or there is a malfunction caused by its working power that has worsened due to being used for too long. This could be due to other issues. a professional plumber will notice this problem right away when he sees it.
For a flush that doesn’t work / a clogged toilet, do what you should to deal with clogged drains. If this method has not solved it, leave this task to a professional plumber, they usually have a variety of ways.
Low Water Pressure
This is no less annoying. Imagine that you are in a hurry to go to work or school, but have to be blocked because the shower cannot provide you with enough clean water to bathe. The cause of this may be a problem (leakage) in the pipe, or damage that is indeed from the network or the center.
Not often, this problem is limited to the shower cap that needs to be adjusted. If this is the case, try cleaning the showerhead by brushing it and freeing it from various stubborn dirt.
Check that the showerhead is installed correctly. If it’s loose, tighten it. If it’s too tight, adjust it while trying to see if the water will come out.
Replace the showerhead with a new one. Don’t rush to disassemble it yourself if you don’t have any previous related experience. Leave it to a professional plumber for disassembly and installation.
Here are some solutions that can be used as a reference at home when this annoying incident occurs. But keep in mind, professional and trusted plumbers are out there and ready to help you.